Vibro-meter 200-510-071-311

Description

Vibro-meter 200-510-071-311
When used as a card pair with an IOC4T
input/output card, the MPC4 is highly suitable for
machinery monitoring and protection in a wide
range of industrial applications.
For further information on the use of MPC4/IOC4T
card pairs in general, refer to the
VM600 machinery protection system (MPS)
hardware manual and the VM600 MPSx software
manuals. For information on the use of MPC4/
IOC4T card pairs in functional safety contexts,
refer to the refer to the VM600 functional safety
manual.
For specific applications, contact your local
Meggitt representative

Dynamic signal inputs
Number of inputs : 4 per MPC4 card
DC range : 0 to +20 V or 0 to −20 V
AC range : ±10 V max.
Common mode voltage range : −50 to +50 V
CMRR : >60 dB at 50 Hz
Crosstalk : −72 dB
Input impedance : 200 kΩ
Current input range
• DC signals : 0 to 25 mA
• AC signals : ±8 mA max.
Analog frequency range : DC to 60 kHz (−3 dB).
Note: Applicable when dynamic signal outputs are shared using
the Raw bus (VM600 rack). Dynamic signal outputs can be shared
with XMx16/XIO16T card pairs but cannot be shared with other
MPC4/IOC4T card pairs.
:
Analog AC frequency range
• Without integration : 0.1 Hz to 10 kHz
• With integration : 2.5 Hz to 10 kHz
Current measuring resistor : 324.5 Ω