RF615 RC610 modular

Description

RF615 RC610
Main unit Slot ID Content options
Plug-in
unit
– HMI Small (4 lines, 16 characters)
Large (8 lines, 16 characters)
X100 Auxiliary power/BO
module
48-250 V DC/100-240 V AC; or 24-60 V DC
2 normally-open PO contacts
1 change-over SO contacts
1 normally-open SO contact
2 double-pole PO contacts with TCS
1 dedicated internal fault output contact
X110 BI/O module Only with configurations B, D, E, F, G, H and J:
8 binary inputs
4 SO contacts
X120 AI/BI module Only with configurations A and B:
3 phase current inputs (1/5 A)
1 residual current input (1/5 A or 0.2/1 A)1)
1 residual voltage input (60-120 V)
3 binary inputs
Only with configurations C, D, E, F, H and J:
3 phase current inputs (1/5 A)
1 residual current input (1/5 A or 0.2/1 A)1)
4 binary inputs
Case X130 AI/BI module Only with configurations E and F:
3 phase voltage inputs (60-120 V)
1 residual voltage input (60-120 V)
4 binary inputs
Sensor input
module
Only with configuration G:
3 combi sensor inputs (three-phase current and voltage)
1 residual current input (0.2/1 A)1)
AI/BI module Only with configuration H and J:
3 phase voltage inputs (60-210 V)
1 residual voltage input (60-210 V)
1 reference voltage input for SECRSYN1 (60-210 V)
4 binary inputs
Optional BI/O
module
Optional for configurations B and D:
6 binary inputs
3 SO contacts
X000 Optional
communication
module
See technical manual for details about different type of
communication modules.
1) The 0.2/1 A input is normally used in applications requiring sensitive earth-fault protection and
featuring core-balance current transformers.
Rated values of the current and voltage inputs are basic setting parameters of the
IED. The binary input thresholds are selectable within the range 18…176 V DC by
adjusting the binary input setting parameters.
The connection diagrams of different hardware modules are presented in this manual.

RF615